DJ-202: Backing up/Restoring Sequencer Data

Backing Up or Restoring Sequencer Data

Backup
Here’s how to back up patterns 1–16 and kits (instruments).

1. While holding down the mixer section’s SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.

2. On your computer, open the “Roland” drive.

3. Open the “BACKUP” folder, and copy all files from dj_prm_kit1.
prm through dj_prm_kit12.prm and dj_prm_ptn1.prm through
dj_prm_ptn16.prm to your computer.

4. When copying is completed, operate your computer to eject
the “Roland” drive.

5. Disconnect the USB cable to power-off the DJ-202.

 

Restore
Here’s how to restore the backed-up sequencer data from your computer to
the DJ-202.

1. While holding down the mixer section’s SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.

2. On your computer, open the “Roland” drive.

3. Copy the backup files into the “Roland” drive’s “RESTORE”
folder.

4. When copying is completed, operate your computer to eject
the “Roland” drive.

5. Press the SEQUENCER section’s [START/STOP] button.
The performance pads blink alternately, and then all performance pads
blink.
NOTE
Never turn off the power while the performance pads are blinking
alternately.

6. Disconnect the USB cable to power-off the DJ-202.

MEMO
Sequencer data is compatible between the DJ-202 and the DJ-505.
If the DJ-505’s sequencer data is restored to the DJ-202, aspects that
cannot be reproduced by the DJ-202 are automatically optimized.

 

 

 

Have more questions? Submit a request