AF-70: Auto Adjust

You can have the AF-70 automatically set itself up with the Auto Adjust function. Use the following procedure to activate Auto Adjust:

  1. Turn the microphone switch to "On," set mixer, power amp, and other equipment levels,then bring up the microphone volume until the desired level is reached. 
  2. Press the [START] button. The Auto indicator flashes,and Auto Adjust begins operation.
  3. Auto adjust ends automatically after securing a safety margin of approximately 12dB. The Auto indicator stops flashing and instead will light steadily. The anti-feedback filter settings are fixed. At this point, feedback adjustments made with Auto Adjust are complete.

NOTE: feedback may occur momentarily during Auto Adjust ,this is due to the feedback detection operation, and settings being made for the safety margin;there is nothing abnormal about this. Feedback will cease after a brief moment.

WARNING: DO NOT TALK INTO THE MICROPHONE DURING AUTO ADJUST.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk