A-30, AX-1: Battery Check

Use the following procedure to check the condition of the batteries:

1. Press the PATCH button so it is not lit.

2. Press the MIDI/PARAMETER button so it is lit.

3. Press the 2 button followed by the 5 button.

4. Press and hold ENTER.

The LEDs will show the condition of the batteries. Each LED lit equals about 2 hours of use if you are using alkaline batteries. The condition of charge is shown as long as the ENTER button is held.

5. Release the ENTER button when finished.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk