Before loading the factory sounds, you should reset the global parameters and clear the memory. Use the following procedure to set up the D-70 to receive original sounds from a card:
NOTE: The following procedure will clear the internal memory and reload the factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)
1. Hold the NUMBER 8 button and turn the power on.
2. Press ENTER.
You are now ready to load the factory sounds from your card:
1. Put the card in the RAM CARD slot.
2. Press EDIT.
3. Press F5[SYSTEM].
4. Press F1[I <> C].
5. Press the INC button to select "INTERNAL < RAM CARD."
6. Press F3[ALL].
7. Press F1[TRANSFER].
8. Press ENTER.
9. Press EXIT twice.
10. You will need to select another Performance to see the
Have more questions? Submit a request