RC-1: Change the Recording Mode or Stop Mode

1. While holding down the pedal switch, turn the power on (insert a plug into
the OUTPUT A jack). The LOOP indicator (red) lights, indicating the current recording mode.
    

2. Press the pedal switch successively twice (within one second) to change the recording mode.


3. Press the pedal switch. The LOOP indicator (green) lights, indicating the current stop mode.


AVAILABLE RECORDING MODES:
    
-UPPER HALF LIT: Switch in the order of recording > overdubbing >  playback (default setting).
    
-LOWER HALF LIT: Switch in the order of recording > playback overdubbing.


AVAILABLE STOP MODES:
   
-UPPER HALF LIT: Press the pedal switch successively twice to stop immediately (default setting).
-LOWER HALF LIT: Press the pedal switch successively twice to enable stopping at the end of the phrase; playback stops when the phrase has played to its end. When playback stops, the phrase is erased.


How operation works when stop has been enabled:

• The LOOP indicator (green) rotates while blinking.

• Press the pedal switch successively twice to stop immediately and erase the phrase.

• Hold down the pedal switch for two seconds.

 

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk