V-1SDI: Saving and Recalling Memory Presets

The memory function is turned on while the [MEMORY] button is held depressed. At this time the [A-1] through [A-4] and [B-1] through [B-4] buttons function as memory selection buttons 1 through 8. The currently selected button lights up in blue.

Memory 1 functions as a Last Memory. By factory default, memory 1 functions as a Last Memory. The current settings are automatically saved in memory 1 when you exit a menu or recall a memory. To stop using the Last Memory function, go to the SETUP menu, and at MEMORY (page 13/16), set “AUTO MEMORY” to “OFF.”

Saving

  1. Hold down the [MEMORY] button and press and hold (for 2 seconds or longer) the button from [A-1] though [A-4] and [B-1] through [B-4] for the number where you want to save the settings. 
    The [A-1] through [A-4] and [B-1] through [B-4] buttons all briefly light up in blue, and the current settings are saved.

  2. To turn off the memory function, release the [MEMORY] button.

**NOTE** When memory 1 has been selected as a destination for saving, the values saved there might be overwritten by the Last Memory function.

Recalling

  1. Hold down the [MEMORY] button and press and the button for the memory number you want to recall. The settings are recalled. The currently selected button lights up in blue.

  2. To turn off the memory function, release the [MEMORY] button.

 

Have more questions? Submit a request