Skip to main content

FANTOM-06 FANTOM-07 FANTOM-08: Using the instrument as an audio interface

  • Updated

You can use the FANTOM-06 FANTOM-07 FANTOM-08 as an audio interface by installing the USB driver that’s compatible with the OS you’re using.

The USB audio specs are as follows.

  • 24-bit, 96 kHz maximum
  • Recording: 16 stereo channels
  • Playback: 2 stereo channels

When installing the USB driver or using the audio interface function, set the “USB Driver” to “VENDOR”.

Follow the steps below.

  1. Press the [MENU] button.
  2. Touch <SYSTEM>.
  3. Touch <GENERAL> tab.
  4. Select “USB Driver”, and set the parameter to “VENDOR” using the [VALUE] dial.
  5. Press the [WRITE] button to save the SYSTEM settings.
  6. Turn the power off, then on again.
  7. Install the USB driver that’s compatible with the OS you’re using.
    • Download the USB driver here.
    • If you’re using Windows 10 or 11, the driver installs automatically when you connect this instrument via USB to a computer that’s connected to the Internet. Refer to the related Q&A, “How do I install the driver on Windows10/11?”.

Once the USB driver is installed, you can select “FANTOM” in the sound settings on your computer, or in the USB audio settings of your DAW software.

Related articles