Yes. VRC-01 System Program Ver. 1.05 or later can enable/disable the reverb applied to the loopback audio. Please update the VRC-01 to the latest version.
To apply reverb only to the audio from the mic (MIC 1, MIC 2, the built-in mic, and the headset mic) without adding reverb to the loopback audio, change the settings in the VRC-01 unit. See "AeroCaster VRC-01 Owner's Manual - Adding Reverb Only to the Mic Audio" for details on the operating procedures.
- When the loopback function is ON, the reverb settings are applied to the audio from the LINE IN jack and the DEVICE port.
- The reverb settings are not saved in the VRC-01. Please make the setting each time you turn on the VRC-01.
- The loopback function on the VRC-01 is only enabled when you use the VRC-01 as an audio interface on your computer or when you use it as a stand-alone mixer.